Hoteche 3pcs Shaft-Mounted Wire Brush Set

Hoteche 3-Piece Shaft-Mounted Wire Brush Set

Versatile 3-piece shaft-mounted wire brush set from Hoteche featuring three brush profiles — a 2″ circular wheel brush, a 2″ cup brush, and a 1″ end brush — all with 1/4″ shanks, crimped brass-coated wire, and 4,500 RPM maximum speed for comprehensive rust removal, cleaning, and surface preparation on metal using a standard power drill.

Key Benefits

• 3 brush profiles in one set for versatile surface preparation
• 2″ circular wheel brush for flat and broad surface cleaning
• 2″ cup brush for surface grinding and heavier cleaning
• 1″ end brush for confined spaces, holes, and recesses
• 1/4″ shank on all three brushes for standard drill compatibility
• 4,500 RPM maximum speed rating
• Brass-coated crimped wire construction
• Complete drill wire brush solution in one pack
• No additional tools required — direct drill chuck fit
• Hoteche quality since 1995

Technical Specifications

• Brand: Hoteche
• Item Number: 591001
• Type: 3-piece shaft-mounted wire brush set
• Contents:
  • 1 × Circular wheel brush — 2″ (50mm)
  • 1 × Cup brush — 2″ (50mm)
  • 1 × End brush — 1″ (25mm)
• Shank: 1/4″ on all three brushes
• Wire Type: Crimped brass-coated steel
• Max Speed: 4,500 RPM
• Compatible With: Standard power drills

Features

• Three brush profiles cover the most common metal cleaning and preparation tasks in a single set
• Circular wheel brush for flat face cleaning and broad surface passes
• Cup brush for surface grinding, heavier cleaning, and weld area preparation
• End brush for accessing confined spaces, drilled holes, pipe bores, and recesses
• All three brushes share a 1/4″ shank for seamless interchange in a standard drill chuck
• Brass-coated crimped wire on all brushes for corrosion resistance and consistent cleaning action
• 4,500 RPM maximum speed for safe full-speed drill operation across all three brushes
• Compact set ideal for toolbox stocking and on-site maintenance kits

Perfect For

• Rust and corrosion removal from metal surfaces
• Weld joint and seam cleaning
• Surface preparation prior to priming and painting
• Cleaning drilled holes, bores, and pipe ends
• Deburring machined and fabricated metal parts
• Removing deposits and scale from metal fittings
• Accessing confined spaces and internal recesses
• Pre-weld surface cleaning
• Automotive bodywork and restoration preparation
• General workshop and maintenance metal cleaning

Key Features

• Three Brush Profiles: Circular wheel, cup, and end brush formats address flat surfaces, deeper grinding, and internal access in a single set — reducing the need to purchase multiple individual brushes
• 2″ Circular Wheel Brush: Flat wire face for efficient cleaning passes across flat plates, structural sections, and broad metal surfaces
• 2″ Cup Brush: Cupped wire profile provides a more aggressive cleaning action and is better suited to weld preparation, heavier surface deposits, and grinding applications than the flat wheel brush
• 1″ End Brush: Cylindrical end-brush profile accesses holes, bores, pipe ends, threaded fittings, and confined recesses where wheel and cup brushes cannot reach
• Shared 1/4″ Shank: All three brushes mount in any standard drill chuck — switch between profiles without changing tools
• Brass-Coated Crimped Wire: Corrosion-resistant wire finish extends brush life and provides clear visual wear indication across all three brushes

Application Instructions

1. Select the appropriate brush profile for the task — circular for flat surfaces, cup for heavier cleaning and weld prep, end for holes and confined spaces
2. Insert 1/4″ shank into drill chuck and tighten securely
3. Verify drill speed does not exceed 4,500 RPM
4. Wear appropriate PPE — face shield or safety glasses and gloves
5. Keep bystanders clear — wire fragments can be ejected during use
6. Apply light, even pressure against the work surface
7. Keep the brush moving — avoid dwelling in one area
8. For the end brush, guide carefully into bores and recesses with light pressure
9. Allow brushes to cool periodically during extended use
10. Inspect wire face on each brush before use — do not use if wires are significantly worn or broken sections are present
11. Store unused brushes in the original packaging to protect wire faces

Keywords: Hoteche wire brush set, 3 piece wire brush set, drill wire brush set, shaft mounted wire brush, circular cup end brush set, 1/4 shank wire brush set, metal cleaning brush set, rust removal drill brush set, 591001, wire brush drill attachment set