CPVC End Cap 3/4″

Product Specifications

• Size: 3/4 inch nominal diameter
• Material: CPVC (Chlorinated Polyvinyl Chloride)
• Color: Off-white/Ivory
• Schedule/Class: Schedule 40
• Connection Type: Socket (slip)
• Standards: ASTM F438, ASTM D2846
• Maximum Working Pressure: 400 PSI @ 73°F (non-shock)
• Temperature Range: 33°F to 180°F (0.5°C to 82°C)
• Chemical Resistance: Superior resistance to acids, bases, salts, and many organic compounds
• NSF Certification: NSF-61 certified for potable water applications
• Lead-Free: Complies with lead-free requirements

Technical Details

• Designed to terminate or cap 3/4″ CPVC pipe runs
• Higher temperature resistance than standard PVC (up to 180°F/82°C)
• Pressure rating decreases by approximately 0.7% for each 1°F increase above 73°F
• Compatible with standard 3/4″ CPVC pipe with an outside diameter of 0.625 inches
• Suitable for hot and cold water distribution systems
• Provides complete sealing of pipe ends for testing or future system expansion
• Manufactured from CPVC compound for enhanced chemical and temperature resistance

Applications

• Hot and cold potable water distribution
• Industrial process piping
• Chemical handling systems
• Hydronic heating systems
• Corrosive fluid transportation
• Water heater connections
• Plumbing test caps
• System isolation points
• Future expansion preparation

Installation Notes

1. Cut pipe squarely and deburr/clean the connecting end
2. Apply appropriate CPVC primer followed by CPVC cement to both the fitting socket and pipe end
3. Insert pipe fully into socket with a quarter-turn twisting motion
4. Hold in place for 30 seconds to ensure initial bonding
5. Allow proper cure time per cement manufacturer’s instructions before pressure testing
6. For hot water applications, ensure system will not exceed 180°F maximum temperature