6G x ¾” Brass Shoulder Countersunk Wood Screw

6G x ¾” Brass Shoulder Countersunk Wood Screw

6G Brass Wood Screw – Decorative Fastener for Fine Woodworking and Hardware Mounting

This 6G Brass Countersunk Wood Screw is a small, premium fastener ideal for delicate woodworking and hardware installation. The 6 Gauge diameter and short 3/4 inch length are perfectly sized for securing small components and thin materials without piercing through the back.

The defining feature is the Polished Brass finish, which offers a brilliant, warm aesthetic that elevates the look of any project, making the screw itself a decorative element. The countersunk flat head is designed to sit perfectly flush with the wood surface, achieving a clean, high-end finish when properly installed. The coarse thread provides reliable holding power in various wood substrates.

Key Benefits

• Premium Aesthetic: Polished Brass finish provides a brilliant, decorative look, perfect for visible mounting applications.

• Countersunk Head: Flat head ensures a clean, flush finish when driven into wood, ideal for high-end cabinetry and trim.

• 6G Diameter: Appropriate small gauge for mounting delicate hardware and thin wood pieces.

• Coarse Thread Grip: Optimized for secure, high-strength hold in wood substrates.

• Compact ¾” Length: Ideal length for fastening thin materials or securing hinges without piercing through the back.

Technical Specifications

• Product Type: Wood Screw / Countersunk Screw

• Diameter: 6 Gauge (6G)

• Lengths Available: 3/4 inch

• Head Type: Countersunk Flat Head

• Thread Type: Coarse Wood Thread

• Finish: Polished Brass

• Application: Decorative Woodworking, Cabinetry, Hardware Mounting

• Grade: Premium/Decorative Utility

Perfect For

• Mounting small brass hardware (hinges, latches, drawer pulls) onto fine furniture.

• Detailed decorative woodworking assembly and crafting.

• Securing thin wooden trim or accents where the fastener must be visible.

• Any wood application requiring a short, aesthetically pleasing fastener.

Application Instructions

• Drilling (CRITICAL): ALWAYS pre-drill a pilot hole to prevent the screw from snapping off and to prevent the wood from splitting, especially in hardwoods.

• Driving: Use a hand screwdriver or a power driver set to a very low torque setting. DO NOT use excessive force or impact mode.

• Setting: Drive the screw until the head is fully seated flush with the wood surface.

• Safety: Wear safety glasses during installation.

Pro Tips

• Pre-drilling is mandatory; the pilot hole should be slightly smaller than the screw core to ensure sufficient grip without breaking the screw head.

• For the highest quality finish, use a dedicated countersink bit before driving the screw to ensure the head sits perfectly flush.

• Clean the screw heads immediately after installation to remove any oils or dust.

• Use a small amount of wax or soap on the threads to further ease driving.

Keywords: 6G brass screws, countersunk wood screws, polished brass fasteners, decorative screws, hinge screws, small wood screw, brass plated screws, furniture hardware, 3/4 inch screws, hardwarett.com