Total 4½” Diamond Cup Wheel

Total 115mm (4½”) Diamond Cup Wheel

Professional-grade segmented turbo diamond cup wheel from Total Tools featuring a 115mm (4½”) diameter, 22.2mm arbor, 13,200 RPM maximum speed rating, and a continuous turbo segment design — engineered for aggressive surface grinding, smoothing, and material removal on concrete, brick, masonry, and stone using a 4½” angle grinder.

Key Benefits

• Segmented turbo diamond cutting segments
• 115mm (4½”) angle grinder compatible
• 22.2mm (7/8″) standard arbor
• 13,200 RPM maximum speed rating
• 80 m/s maximum peripheral speed
• Ventilated body for heat dissipation
• Fast, aggressive material removal
• Suitable for concrete, brick and masonry
• Wet and dry use compatible
• Professional grade construction

Technical Specifications

• Brand: Total Tools
• Model: TAC2411151
• Type: Segmented turbo diamond cup wheel
• Wheel Size: 115mm (4½”)
• Arbor Size: 22.2mm (7/8″)
• Max Speed: 13,200 RPM
• Max Peripheral Speed: 80 m/s
• Application: Concrete, brick, masonry, stone
• Use: Wet or dry
• Compatible With: 4½” angle grinders

Features

• Continuous turbo segmented diamond rim for high-speed aggressive grinding
• Ventilated steel body with multiple apertures for cooling and debris clearance
• 22.2mm standard arbor for broad angle grinder compatibility
• Rated to 13,200 RPM for use with standard 4½” angle grinders
• Turbo segment geometry promotes fast cutting with reduced heat build-up
• Wet and dry use capability
• Directional rotation arrows marked on body for correct installation
• Durable steel cup body with teal powder coat finish

Perfect For

• Concrete surface grinding and levelling
• Removing high spots, laitance, and surface coatings from concrete
• Brick and block face grinding
• Stone surface preparation
• Mortar and adhesive removal
• Surface preparation prior to tiling or coating
• Weld and joint flush grinding on masonry
• General masonry material removal
• Construction and renovation site work
• Floor and wall surface preparation

Key Features

• Segmented Turbo Design: Continuous turbo diamond segments provide aggressive cutting action with efficient heat and debris evacuation between segments for sustained grinding performance
• 115mm (4½”) Compatibility: Fits all standard 4½” angle grinders with a 22.2mm (7/8″) arbor — the most widely used grinder size on construction sites
• 13,200 RPM Rated: Maximum speed rating aligns with the no-load speed of standard 4½” angle grinders for safe, full-speed operation
• Ventilated Body: Multiple apertures in the steel cup body reduce heat build-up and allow grinding debris to clear freely during operation
• Wet and Dry Use: Suitable for both dry grinding and wet grinding with water suppression for dust control and extended segment life
• Directional Markings: Rotation direction arrows on the body ensure correct installation and optimal segment performance

Application Instructions

1. Ensure angle grinder is switched off and disconnected from power before fitting
2. Verify grinder arbor is 22.2mm (7/8″) and speed does not exceed 13,200 RPM
3. Fit cup wheel to grinder spindle with the diamond face facing outward
4. Secure with the appropriate flange nut — do not overtighten
5. Confirm rotation direction matches arrows marked on the wheel body
6. Replace guard and reconnect power
7. Wear appropriate PPE — face shield, dust mask, hearing protection, and gloves
8. Begin grinding with light, even pressure — do not force the wheel into the surface
9. Keep the wheel moving to avoid dwelling in one area and overheating
10. Allow wheel to cool periodically during extended use
11. For wet use, ensure adequate water flow is maintained throughout operation
12. Inspect segments before each use — do not use if segments are damaged or unevenly worn

Keywords: Total diamond cup wheel, 115mm cup wheel, 4.5 inch diamond cup wheel, turbo cup wheel, concrete grinding wheel, masonry grinding disc, angle grinder cup wheel, diamond grinding wheel, TAC2411151, concrete surface grinder, turbo segmented cup wheel