⅝” x 4½” Wedge Anchor

5/8″ x 4-1/2″ Wedge Anchor

5/8″ x 4-1/2″ Wedge Anchor – Reliable, High-Tensile Strength for Concrete Fastening

The 5/8″ x 4-1/2″ Wedge Anchor is a high-performance structural fastener designed for heavy load-bearing applications in solid concrete. The size (5/8″ diameter and 4-1/2″ length) ensures sufficient embedment depth and achieves high tensile and shear load ratings required for serious industrial tasks.

The core of its holding power lies in the wedge expansion mechanism : when the hex nut is tightened, the bolt pulls the tapered wedge clip up, forcing it to expand against the concrete wall of the pre-drilled hole. This creates a powerful, fixed anchor point. Constructed from durable zinc-plated steel, the anchor resists corrosion, providing a reliable, long-lasting solution for industrial and structural applications.

Key Benefits

• High Load Capacity: 5/8″ diameter provides extremely high tensile and shear strength for structural applications.

• Optimal Embedment: 4-1/2″ length ensures adequate anchoring in concrete slabs or structural elements.

• Simple Through-Bolt Design: Allows the fixture to be installed directly over the anchor before tightening.

• Corrosion Resistance: Zinc-plated steel finish protects against rust and ensures long service life.

• Immediate Full Load: Achieves full specified load capacity immediately upon tightening (does not require curing time like chemical anchors).

Technical Specifications

• Product Type: Wedge Anchor / Through Bolt Anchor

• Size: 5/8 inch Diameter x 4-1/2 inches Length

• Material: Steel (Zinc Plated Finish)

• Mechanism: Wedge Expansion (Sleeve/Clip Type)

• End Type: Threaded with Hex Nut and Washer

• Application: Structural Concrete, Heavy Machinery, High-Load

• Grade: Industrial/Critical Heavy-Duty

Perfect For

• Anchoring structural steel components, base plates, and ledger boards to concrete.

• Securing vibrating or extremely heavy machinery and equipment.

• Installing heavy-duty rail systems, barriers, and industrial racking.

• Commercial and industrial construction requiring certified load ratings.

Application Instructions

• Drilling: Drill a hole (same diameter as the anchor, 5/8″) into the concrete to the required depth using a hammer drill.

• Cleaning: Clean the hole thoroughly of all dust and debris.

• Installation: Drive the anchor through the fixture (pre-drilled hole) and fully into the concrete hole.

• Tightening: Turn the hex nut with a wrench. This pulls the bolt up, setting the wedge and expanding the sleeve securely inside the concrete.

• Checking: Tighten to the manufacturer’s recommended torque.

Pro Tips

• CRITICAL: Use a hammer drill and a correct diameter carbide bit for a precise hole. The holding power depends on the correct hole size.

• Always clean the drilled hole thoroughly (brush and vacuum) to prevent concrete dust from inhibiting the wedge expansion.

• Do not use in soft materials like block or hollow brick unless specifically rated for those substrates.

• Ensure the anchor is embedded to the recommended depth for full load capacity.

Keywords: 5/8 inch wedge anchor, 4-1/2 inch through bolt, heavy duty concrete anchor, structural steel fastener, wedge expansion anchor, zinc plated anchor, high tensile concrete bolt, industrial anchor, large diameter anchor, hardwarett.com