10G Brass Shoulder Countersunk Wood Screw

10G Brass Shoulder Countersunk Wood Screws (1″ to 3″)

10G Brass Wood Screws – Decorative Strength and Premium Finish for Fine Woodworking

These 10G Polished Brass Countersunk Wood Screws are premium, high-quality fasteners designed for beautiful and structurally sound woodworking, particularly where the fastener will be visible. Available in a wide range of lengths from 1 inch up to 3 inches, they offer versatility for assembling thick joints or mounting substantial brass hardware.

The defining feature is the Polished Brass finish, which offers a brilliant, warm aesthetic that resists light corrosion. The robust 10 Gauge diameter provides good structural support over thinner screws, while the countersunk flat head is designed to sit perfectly flush with the wood surface, achieving a clean, high-end finish. The coarse thread is optimized for strong, long-lasting holding power in wood substrates.

Key Benefits

• Premium Aesthetic: Polished Brass finish provides a brilliant, decorative look, perfect for visible mounting applications.

• Countersunk Head: Flat head ensures a clean, flush finish when driven into wood, minimizing protrusion.

• 10G Medium Gauge: Offers good structural support over thinner screws for secure hardware mounting.

• Coarse Thread Grip: Optimized for fast driving and secure, high-strength hold in wood substrates.

• Versatile Range: Available in lengths from 1 inch up to 3 inches to suit various assembly and mounting needs.

Technical Specifications

• Product Type: Wood Screw / Countersunk Screw

• Diameter: 10 Gauge (10G)

• Lengths Available: 1 inch, 2 inches, 2.5 inches, 3 inches

• Head Type: Countersunk Flat Head

• Thread Type: Coarse Wood Thread

• Finish: Polished Brass

• Application: Decorative Woodworking, Cabinetry, Hardware Mounting

• Grade: Premium/Decorative

Perfect For

• Mounting brass hardware (hinges, latches, drawer pulls) onto fine furniture.

• Decorative woodworking assembly and cabinetry.

• Restoring antique furniture with authentic-looking fasteners.

• Any wood application where the fastener must be highly visible and aesthetically pleasing.

Application Instructions

• Drilling: ALWAYS pre-drill a pilot hole to prevent the screw from snapping off and to prevent the wood from splitting.

• Driving: Use a hand screwdriver or a power driver set to a low torque setting. DO NOT use excessive force or impact mode.

• Setting: Drive the screw until the head is fully seated flush with the wood surface.

• Safety: Wear safety glasses during installation.

Pro Tips

• Pre-drilling is mandatory; the pilot hole should be slightly smaller than the screw core to ensure sufficient grip without breaking the screw head.

• For the highest quality finish, use a dedicated countersink bit before driving the screw to ensure the head sits perfectly flush.

• Clean the screw heads immediately after installation to remove any oils or dust.

• Use a small amount of wax or soap on the threads to further ease driving.

Keywords: 10G brass screws, countersunk wood screws, polished brass fasteners, decorative screws, furniture hardware, brass plated screws, wood assembly, high-end fasteners, 1 inch 3 inch screws, hardwarett.com