M10 Eye Expansion Rawl Bolt

M10 Eye Expansion Rawl Bolt

M10 Heavy Duty Eye Expansion Rawl Bolt – Secure, High-Tensile Anchor for Concrete and Masonry

The M10 Heavy Duty Eye Expansion Rawl Bolt is a professional-grade anchoring solution built for high-load applications in solid masonry and concrete. This M10 (10mm) metric anchor utilizes a robust sleeve expansion mechanism: as the external nut is tightened, the internal bolt is pulled, expanding the sleeve against the walls of the drilled hole, ensuring exceptional pull-out and shear resistance.

The anchor features a closed eye end, which provides a secure, permanent attachment point for rigging, safety chains, wires, or heavy overhead loads. Constructed from durable steel and finished with yellow zinc plating (chromate finish), the rawl bolt offers enhanced protection against rust and corrosion, making it suitable for both interior and mild exterior environments.

Key Benefits

• High Load Capacity: Heavy-duty sleeve design provides strong, reliable holding power in concrete and brick.

• Permanent Anchor Point: Features a closed eye for securely attaching cables, chains, or overhead supports.

• Corrosion Resistance: Yellow zinc plating offers enhanced protection against rust, suitable for mild exterior use.

• M10 Standard: Standard 10mm metric thread size is compatible with common tools and load calculations.

• Pre-Assembled: Comes complete with the nut, washer, and expansion sleeve, ready for immediate installation.

Technical Specifications

• Product Type: Eye Expansion Rawl Bolt / Sleeve Anchor

• Size: M10 (10mm Metric Thread Diameter)

• Material: Steel (Yellow Zinc Plated/Chromate Finish)

• Mechanism: Sleeve/Shield Expansion

• End Type: Closed Eye with Hex Nut and Washer

• Application: Concrete, Solid Masonry, Heavy-Duty Hanging

• Grade: Heavy-Duty/Industrial

Perfect For

• Installing heavy shelving, railings, or equipment into concrete walls.

• Securing large guy wires, safety cables, or barrier chains to the floor or ceiling.

• Overhead rigging for lighting, pipes, or vents in commercial buildings.

• Any application requiring a robust, permanent anchor point with an open loop.

Application Instructions

• Drilling: Drill a hole (check the manufacturer’s recommended size for M10 anchors) into the masonry/concrete to the specified depth using a hammer drill.

• Cleaning: Clean the hole thoroughly of all dust and debris.

• Insertion: Insert the anchor bolt completely into the hole.

• Tightening: Turn the hex nut with a wrench. This action pulls the bolt, expanding the sleeve anchor securely inside the drilled hole.

• Checking: Ensure the anchor is tight and secure before applying load.

Pro Tips

• Always check the drill bit size against the anchor specifications for a perfect, secure fit.

• Ensure the hole depth is correct; too shallow or too deep will compromise the holding power.

• Clean the drilled hole thoroughly with a brush and vacuum to maximize the friction and grip of the expansion sleeve.

• Do not reuse the anchor once it has been fully tightened and removed.

Keywords: M10 eye bolt, expansion rawl bolt, sleeve anchor, heavy duty concrete anchor, yellow zinc plating, closed eye bolt, masonry anchor, M10 fastener, overhead rigging, industrial hardware, hardwarett.com