Micro Milling Plaster Mix 50lbs

USES
Ideal for plastering of walls, brick laying, stone work, and patching of damaged mortar.

PREPARATION
Ensure surface to be plastered or repaired is clean and free from dust, oil, paint, or anything likely to prevent a satisfactory bond.

MIXING

• Empty contents into a wheelbarrow or onto a smooth non-porous surface
• Add water gradually, mixing thoroughly until a workable consistency is achieved
• Avoid a soupy mix as too much water will weaken the mix

APPLICATION

• Apply the product to a uniform thickness of approximately 10-12mm (3/8″- 1/2″) float to an even surface with a wood float.
• This plaster should be applied in a continuous process to avoid dry line jointing. If breaks cannot be avoided they should be where services or architectural features, such as reveals or lines of doors and windows, help mask joints.
• When used for plastering or patching, a PVA or acrylic or bonding agent should be mixed in.

CLEAN UP
Clean hands and tools with soapy water before materials dry.

PACKAGING
Micro Milling Plaster Mix is packaged in 50lb (22.68kg) multiwall paper sacks with a moisture barrier within to ensure a long shelf-life.

STORAGE & SHELF LIFE
Store in dry conditions, above the ground in well-ventilated areas for the best life expectancy–up to six (6) months in unopened bag.

Use personal protective equipment (gloves, boots, goggles and mask) when handling or using all Micro Milling Ltd products.