Hitech 2″x4″ Doorbell Switch Cover Plate

Hitech 2″x4″ Doorbell Switch Cover Plate

Surface-mount doorbell push switch from Hitech, mounted on a wide rectangular plate with a momentary push button marked with a bell icon and “PUSH” label — designed to trigger a wired door chime or bell from a single wall-mounted point.

Features

• Momentary Push Action — The button completes the circuit only while pressed, triggering the connected chime or bell without needing a separate switch to reset.
• Surface-Mount Plate — Mounts directly to the wall surface, so it works anywhere a recessed box isn’t practical — entryways, gates, or replacing an existing surface-mounted bell push.
• Clear Bell Icon and “PUSH” Label — Removes any ambiguity about the button’s function for visitors and household members alike.
• 250V AC Rating — Rated for mains-voltage bell circuits rather than a low-voltage transformer setup, so it’s wired directly into the household circuit feeding the chime.
• Wide Rectangular Cover Plate — Larger surface footprint than a typical single-gang switch plate, giving a stable base for wall mounting.

Technical Specifications

• Brand: Hitech
• Type: Surface-mount momentary push switch (doorbell/bell push)
• Voltage Rating: 250V AC
• Mounting: Surface mount, wide rectangular plate

Perfect For

• Wired doorbell and door chime circuits
• Front entrance and gate bell push installations
• Replacing a worn or non-functioning bell push switch
• Homes and offices without recessed wall boxes at the entry point
• General residential and light commercial doorbell wiring

Application Instructions

1. Switch off the circuit breaker feeding this line before starting — this switch is rated for mains voltage, not a low-voltage transformer circuit.
2. Confirm the wires are dead with a voltage tester before making any connections.
3. Mount the back plate to the wall surface using the screw holes, then connect the wiring to the switch terminals.
4. Secure the switch body over the back plate, making sure it seats flush against the wall.
5. Restore power at the breaker and test the button to confirm the connected chime or bell sounds correctly.

Keywords: Hitech doorbell switch, bell push switch, surface mount doorbell button, momentary push switch, 250V doorbell switch, door chime switch, PUSH button switch