Volteck Vertical Switch

Volteck Vertical Switch

Standard-line vertical toggle switch from Volteck, built with a nylon/polycarbonate body and galvanized steel mounting strap for flush installation in a standard wall box — a straightforward single-pole switch for controlling lights, dryers, and other fixed electrical loads.

Features

• Nylon/Polycarbonate Body — Durable plastic construction resists cracking and holds up to repeated toggling over years of use.
• Galvanized Steel Mounting Strap — Corrosion-resistant strap provides a secure, rigid mounting point in a standard wall box and won’t rust or weaken over time.
• Flame-Retardant Material — Formulated to resist ignition, adding a margin of safety at a point in the circuit where heat and sparking can occur.
• 15 Amp Rating — Rated above typical 10A light switches, giving headroom for higher-draw fixed loads like dryers in addition to standard lighting.
• Includes Mounting Screws — Ships with the hardware needed for installation, so there’s no separate part to source.

Technical Specifications

• Brand: Volteck
• Item Number: 46000
• Model/Key Code: APSE-S
• Type: Vertical single-pole toggle switch, flush mount, Standard line
• Color: Ivory
• Material: Nylon/polycarbonate body, galvanized steel strap
• Voltage / Frequency: 120V / 60Hz
• Current Rating: 15 Amp
• Certification: Complies with NOM-003-SCFI

Perfect For

• Controlling lighting circuits in a standard wall box
• Dryer and other fixed appliance switching
• Replacing a worn or non-functioning flush-mount toggle switch
• New construction wiring using standard electrical boxes
• General residential and light commercial installations

Application Instructions

1. Switch off the circuit breaker feeding this line before starting — never wire a switch with the circuit live.
2. Confirm the wires are dead with a voltage tester before making any connections.
3. Connect the wiring to the switch terminals, noting the green grounding screw for the ground wire.
4. Secure the switch into the wall box using the mounting strap and provided screws, then fit the wall plate (sold separately if not included).
5. Restore power at the breaker and test the switch for correct on/off operation.

Keywords: Volteck vertical switch, APSE-S, toggle switch 15A, flush mount switch, Volteck 46000, ivory toggle switch, standard line switch, single pole toggle switch