Fimex Surface Mount 1 Gang Switch

Fimex Surface Mount 1 Gang Switch

Single-pole surface-mount light switch from Fimex, built in durable polypropylene for wiring installations without a recessed wall box — controls one lighting circuit from a compact oval-shaped plate that mounts directly to the wall.

Features

• Polypropylene Construction — Impact-resistant plastic body holds up to repeated switching and everyday wall contact without cracking or discoloring over time.
• Surface-Mount Design — Mounts directly to the wall surface with two screws, so it works anywhere a recessed switch box isn’t practical — additions, exposed conduit runs, or replacing an existing surface switch.
• 10 Amp Rating — Sized for standard lighting circuits, covering typical household and light fixture loads.
• 127/250 Volt AC Compatibility — Rated for both 127V and 250V circuits, so one switch covers the voltage ranges common across Caribbean and Latin American wiring.
• Single 1-Way Configuration — Straightforward on/off control from a single switching point.
• Compact Oval Footprint — Small mounting profile that fits tight spaces without extra wall clearance.

Technical Specifications

• Brand: Fimex
• Catalogue Number: A3011
• Type: Single 1-way surface-mount switch
• Material: Polypropylene
• Current Rating: 10 Amp
• Voltage Rating: 127/250 Volt AC
• Mounting: Two-screw, surface mount

Perfect For

• Controlling a single lighting circuit from a surface-mount point
• Additions, sheds, and outbuildings without recessed wall boxes
• Replacing a worn or cracked surface switch
• Exposed-conduit electrical installations
• General residential and light commercial lighting control

Application Instructions

1. Switch off the circuit breaker feeding this line before starting — never wire a switch with the circuit live.
2. Confirm the wires are dead with a voltage tester before making any connections.
3. Mount the switch back plate to the wall surface using the two screw holes, then connect the wiring to the terminals.
4. Secure the switch body over the back plate, making sure it seats flush against the wall.
5. Restore power at the breaker and test the switch for correct on/off operation.

Keywords: Fimex surface switch, A3011, single pole surface switch, 1-way switch, polypropylene light switch, surface mount switch, 10A light switch, 127/250V switch, Fimex electrical materials